<div dir="auto">Hello Sergio,<div dir="auto"><br></div><div dir="auto">The basic solution I would recommend is to apply a barrier layer and then write the number on that layer with ink. This way, the number can be corrected or removed if necessary, but it can't just fall off. </div><div dir="auto"><br></div><div dir="auto">A conservation-grade barrier layer would be Paraloid B-72 (dissolved in acetone. About 5-10% should do). Apply it with a brush, wait a few minutes, then write the number. Most "permanent" markers do fade sometime, so we use the old way: black china ink or white ink (whatever is most visible on the surface) applied with a pen nib. </div><div dir="auto"><br></div><div dir="auto">With some practice, this is easy to do even on small bits. </div><div dir="auto"><br></div><div dir="auto">Hope this helps, </div><div dir="auto"><br></div><div dir="auto">Gali Beiner</div><div dir="auto">Conservator</div><div dir="auto">National Natural History Collections at the Hebrew University, Jerusalem, Israel</div></div>