[Nhcoll-l] Desktop thermal printers?
Bentley, Andrew Charles
abentley at ku.edu
Fri Mar 27 09:30:02 EDT 2026
Ian
I could not find what the composition of Teslin paper is online but it appears similar to the spun bound polyester medium we use in our thermal printers. I would always guard against laser or inkjet printing as they are not permanent and in some cases require further heat treatment to make them stand up to immersion in alcohol for long periods.
Andy
A : A : A :
}<(((_°>.,.,.,.}<(((_°>.,.,.,.}<)))_°>
V V V
Andy Bentley
Ichthyology Collection Manager
University of Kansas
Biodiversity Institute
Dyche Hall
1345 Jayhawk Boulevard
Lawrence, KS, 66045-7561
USA
Tel: (785) 864-3863<tel:%28785%29%20864-3863>
Fax: (785) 864-5335<tel:%28785%29%20864-5335>
Email: abentley at ku.edu<mailto:abentley at ku.edu>
ORCID: https://orcid.org/0000-0002-3093-1258
http://ichthyology.biodiversity.ku.edu<http://ichthyology.biodiversity.ku.edu/>
A : A : A :
}<(((_°>.,.,.,.}<(((_°>.,.,.,.}<)))_°>
V V V
________________________________
From: Ian Engelbrecht <ianicus.za at gmail.com>
Sent: Thursday, March 26, 2026 5:16 PM
To: Bentley, Andrew Charles <abentley at ku.edu>
Cc: Derieg, Katrina <katrina.derieg at mso.umt.edu>; Natural History Collections Listserv <nhcoll-l at mailman.yale.edu>
Subject: Re: [Nhcoll-l] Desktop thermal printers?
Hi folks,
Has anyone tried printing on Teslin paper for wet collections? You can just use a regular laser printer, and a few of the wet collection managers here in South Africa swear by it. For a smaller collection with less frequent printing it might be a good option, but the question with any new medium is whether it lasts for decades/centuries.
Ian
On Tue, 24 Mar 2026 at 18:28, Bentley, Andrew Charles <abentley at ku.edu<mailto:abentley at ku.edu>> wrote:
Hi Katrina
I do not have any experience using desktop thermal printers but do have a lot of experience using commercial ones and can highly recommend spending the extra cash to get one of these that will serve you well. I am not sure if some of the brands that make these commercial printers make desktop versions, but you may want to try CAB SQUIX (https://codesource.com/collections/cab-squix-thermal-transfer-printers) as they make a very good commercial version. One issue that you will find is that these smaller printers will not accept the rolls of media we are traditionally purchasing for museum use as they are too large. I suspect that they are also not designed for the heavier polyester media hence why you were having issues with rollers in your previous version.
There do appear to be second-hand commercial thermal printers available that you may consider given your budget.
I would stay away from laser printed labels if possible. I have never had much luck with longevity of laser printed labels.
Hope that helps
Andy
A : A : A :
}<(((_°>.,.,.,.}<(((_°>.,.,.,.}<)))_°>
V V V
Andy Bentley
<https://www.google.com/maps/search/1345+Jayhawk+Boulevard+%0D%0A+Lawrence,+KS,+66045-7561+%0D%0A+USA?entry=gmail&source=g>Ichthyology Collection Manager
<https://www.google.com/maps/search/1345+Jayhawk+Boulevard+%0D%0A+Lawrence,+KS,+66045-7561+%0D%0A+USA?entry=gmail&source=g>University of Kansas
Biodiversity Institute
Dyche Hall
1345 Jayhawk Boulevard<https://www.google.com/maps/search/1345+Jayhawk+Boulevard+%0D%0A+Lawrence,+KS,+66045-7561+%0D%0A+USA?entry=gmail&source=g>
Lawrence, KS, 66045-7561<https://www.google.com/maps/search/1345+Jayhawk+Boulevard+%0D%0A+Lawrence,+KS,+66045-7561+%0D%0A+USA?entry=gmail&source=g>
USA<https://www.google.com/maps/search/1345+Jayhawk+Boulevard+%0D%0A+Lawrence,+KS,+66045-7561+%0D%0A+USA?entry=gmail&source=g>
Tel: (785) 864-3863<tel:%28785%29%20864-3863>
Fax: (785) 864-5335<tel:%28785%29%20864-5335>
Email: abentley at ku.edu<mailto:abentley at ku.edu>
ORCID: https://orcid.org/0000-0002-3093-1258
http://ichthyology.biodiversity.ku.edu<http://ichthyology.biodiversity.ku.edu/>
A : A : A :
}<(((_°>.,.,.,.}<(((_°>.,.,.,.}<)))_°>
V V V
________________________________
From: Nhcoll-l <nhcoll-l-bounces at mailman.yale.edu<mailto:nhcoll-l-bounces at mailman.yale.edu>> on behalf of Derieg, Katrina <katrina.derieg at mso.umt.edu<mailto:katrina.derieg at mso.umt.edu>>
Sent: Tuesday, March 24, 2026 11:08 AM
To: Natural History Collections Listserv <nhcoll-l at mailman.yale.edu<mailto:nhcoll-l at mailman.yale.edu>>
Subject: [Nhcoll-l] Desktop thermal printers?
Hi NHC community,
I am hoping to step up my game with fluid labeling. We have a very small fluid collection in just a few flammable cabinets, so we have a low volume of fluid specimens being prepared, but I'm hoping to slowly expand. For reference, we are using only ethanol and not formalin going forward.
A few years ago, I bought and used a GoDEX ZX430i thermal printer when I was at UMNH and that thing was the bane of my existence. I found it difficult to dial in the settings, and the media (Tyvek) was too slick for the rollers to grab consistently. I'm sure the Tyvek was mostly the problem there, but in any case I would prefer to avoid an industrial thermal printer, mostly because of cost.
Has anyone used desktop thermal printers? Example: Brother TD-4520TN<https://brothermobilesolutions.com/products/printers/td/td-4/td4520tn/> If so, can you use them with continuous rolls of printing media? Most of the desktop ones seem to be direct thermal for sticker labels. I mainly want to print small tags (1" x 0.25") for individual specimens, as well as internal jar labels (~ 3" x 4" or 4" x 6"). Has anyone achieved this with desktop thermal printers? With what kind of media?
I'd like to spend less than $1000 USD on a printer.
Alternatively, does anyone have any thoughts on laser jet printing with special media for fluid tags/labels? This would honestly be my preference, as I already have a laser jet printer. Currently I am just printing fluid tags on acid-free card stock with the laser jet, but I know that is far from ideal.
I know there is a TON of info out there on labeling for fluid collections, but I find it hard to sift through for my needs and would just like to hear from the community on what works for you folks.
Thanks in advance!!
-Katrina
KATRINA DERIEG (she/her)
Curator | Museum Collections and Outreach Coordinator
Phillip L. Wright Zoological Museum (UMZM)
https://www.umt.edu/zoological-museum/
Shipping: Health Science 104 | 32 Campus Drive | 406<https://www.google.com/maps/search/32+Campus+Drive+%7C+406?entry=gmail&source=g>-243-4743
Office: Health Science 211
katrina.derieg at umontana.edu<mailto:katrina.derieg at umontana.edu> | umzm at mso.umt.edu<mailto:umzm at mso.umt.edu>
University of Montana
Search the UMZM collections on Arctos: Birds<https://arctos.database.museum/search.cfm?guid_prefix=UMZM:Bird> | Mammals<https://arctos.database.museum/search.cfm?guid_prefix=UMZM:Mamm> | Eggs & Nests<https://arctos.database.museum/search.cfm?guid_prefix=UMZM:Egg> | Parasites<https://arctos.database.museum/search.cfm?guid_prefix=UMZM:Para>
_______________________________________________
Nhcoll-l mailing list
Nhcoll-l at mailman.yale.edu<mailto:Nhcoll-l at mailman.yale.edu>
https://mailman.yale.edu/mailman/listinfo/nhcoll-l
_______________________________________________
NHCOLL-L is brought to you by the Society for the Preservation of
Natural History Collections (SPNHC), an international society whose
mission is to improve the preservation, conservation and management of
natural history collections to ensure their continuing value to
society. See http://www.spnhc.org<http://www.spnhc.org/> for membership information.
Advertising on NH-COLL-L is inappropriate.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.yale.edu/pipermail/nhcoll-l/attachments/20260327/92465ddc/attachment.html>
More information about the Nhcoll-l
mailing list